5/8x22 Round Malleable Washer Malleable Iron Hot Dip Galvanized

Description

Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc. *Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit). Part #: 0000-131093. Part #: 0000-131093. Buy as few as 10 pcs. Discounts on larger quantities. PRODUCT SPECIFICATIONS Part #: 0000-131093 Fastener Type: Round Malleable Washer Size Description: 5/8" Diameter/Nominal Size: 5/8"* Inside Diameter: 0.689-0.750" Outside Diameter: 2.625-2.750" Thickness: 0.310-0.335" System of Measurement: Inch Material: Malleable Iron Finish: Hot Dip Galvanized Average Piece Weight: 0.2644710 lbs. *Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit). Actual inside diameter is almost always larger than stated size. Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc. Discounts on larger quantities. Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Buy as few as 10 pcs.

Key Features

• Actual inside diameter is almost always larger than stated size.
• *Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit).
• PRODUCT SPECIFICATIONS Part #: 0000-131093 Fastener Type: Round Malleable Washer Size Description: 5/8" Diameter/Nominal Size: 5/8"* Inside Diameter: 0.689-0.750" Outside Diameter: 2.625-2.750" Thickness: 0.310-0.335" System of.
• Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.
• Part #: 0000-131093.
• Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the.