Awlgrip Polyester Urethane Topcoat Base - Snow White High Gloss - Quart G8044

Description

Application Instructions General: Sanded surface must be dry and clean. Then apply a full, wet coat to achieve color coverage and film thickness requirements. 40% is maximum. Two to three coats are recommended for spray applications. Brush/Roller Application: Apply Awlgrip Topcoat in two coats of 1.5 to 2.5 mils WFT each. Allow tack coat to "flash off" 30 to 45 minutes. If preferred, 3 coats may be used. Reduce up to 25% with spray reducers appropriate for conditions. Allow 16 hrs between each coat. Brush/roller applications require two coats. Clear coats, metallic colors, and painting in high temperatures may require additional reduction. Overall mix is 1:1 1/2 by volume. Sanding between coats with 280 to 400 grit paper will provide a smoother finish. Awl-grip high gloss G3005 can be applied over dark colors which have been sanded with 320-400 grit paper. Long lasting; high gloss resistance to sun, saltwater, chemicals and abrasion Appropriate for use on fiberglass, steel and wood Low maintenance Above the waterline use only Available in quarts and gallons Custom colors available ***. Using a contrasting mist coat of lacquer primer as a "guide coat" is recommended. Mixing and Reduction Spray Mix one part Topcoat Base Component with one part Awl Cat #2 G3010 spray converter to a smooth, homogenous mixture. The second coat is a slightly heavy tack coat with the third coat just wet enough to obtain full hide or color coverage. Reduce 25-33% with T0031.

Key Features

• Allow second coat to "flash off" 30 to 45 minutes until only slightly tacky before applying third coat.
• Allow tack coat to "flash off" 30 to 45 minutes.
• Long lasting; high gloss resistance to sun, saltwater, chemicals and abrasion Appropriate for use on fiberglass, steel and wood Low maintenance Above the waterline use only Available in quarts and gallons Custom colors available ***.
• Awlgrip provides a durable high gloss finish to wood, fiberglass, aluminum or steel and can be applied with a roller, brush or spray gun.
• Do not apply 3005 over white or pastel colors, or to bare wood.
• Sanding between coats with 280 to 400 grit paper will provide a smoother finish.