Eldon James 1/4-19 BSP to 3/8\\

Description

Pressure 150 psi at 70 F. This is accomplished by cutting the threads on a taper. Eldon James 1/4-19 BSP to 3/8" Barbed Adapter, Black Nylon BSPT threads have on the Whitworth thread form, which is designed to provide a pressure-tight fit through mating of the threads. This is accomplished by cutting the threads on a taper. Because they are tapered, the thread can only screw into the companion female thread a certain distance before it jams. The standard specifies this distance as a length based on hand-tight engagement; a convenient rule-of-thumb for plastic threads is: finger-tight plus 1/2 to 1 turn with a wrench. Do not over-tighten plastic threads stress on the fitting can result in its failure. Made from 6/6 nylon - exhibits strength, moderate stiffness, high service temperature, high impact resistance and tensile strength. Resistant to fuels, lubricants and many chemicalsVulnerable to attack by phenols, strong acids and oxidizing agents. Used in fuel line, vacuum systems and general purpose applications: automotive industry approvals.Temperature Range -50 F to 275 F (135 C). Pressure 150 psi at 70 F. Eldon James 1/4-19 BSP to 3/8" Barbed Adapter, Black Nylon BSPT threads have on the Whitworth thread form, which is designed to provide a pressure-tight fit through mating of the threads. Used in fuel line, vacuum systems and general purpose applications: automotive industry approvals.Temperature Range -50 F to 275 F (135 C).

Key Features

• Because they are tapered, the thread can only screw into the companion female thread a certain distance before it jams.
• Made from 6/6 nylon - exhibits strength, moderate stiffness, high service temperature, high impact resistance and tensile strength.
• Eldon James 1/4-19 BSP to 3/8" Barbed Adapter, Black Nylon BSPT threads have on the Whitworth thread form, which is designed to provide a pressure-tight fit through mating of the threads.
• This is accomplished by cutting the threads on a taper.
• Do not over-tighten plastic threads stress on the fitting can result in its failure.
• The standard specifies this distance as a length based on hand-tight engagement; a convenient rule-of-thumb for plastic threads is: finger-tight plus 1/2 to 1 turn with a wrench.