SHW Electric Height Adjustable Computer Desk - 48 x 24 Inches, Light Cherry

Description

After completing initialization the height will be at its lowest setting. Initialization / Reset Process: Press and hold the "Up Down" Keys for a few seconds. Initialization / Reset Process: Press and hold the "Up Down" Keys for a few seconds. The LED Display will start to flash "000" and the table will slowly lower at the same time. After the table reaches its lowest height the controller will beep twice. The Initialization Process is now complete. If you stop pressing/holding the Keys at any time during initialization the initialization process will fail to complete. The LED Display will show "- - -". If this happens press and hold the "Up Down" Keys for a few seconds to resume the Initialization Process. When the process is done the controller will beep twice. The Initialization Process MUST be completed for the height adjustment feature to operate properly. After completing initialization the height will be at its lowest setting. You may now press the "Up" or "Down" Keys to adjust table height. The LED Display will automatically turn off after a few seconds of inactivity. The Initialization Process MUST be completed for the height adjustment feature to operate properly. When the process is done the controller will beep twice. The LED Display will start to flash "000" and the table will slowly lower at the same time. You may now press the "Up" or "Down" Keys to adjust table height. The LED Display will automatically turn off after a few seconds of inactivity.

Key Features

• After the table reaches its lowest height the controller will beep twice.
• If this happens press and hold the "Up Down" Keys for a few seconds to resume the Initialization Process.
• The Initialization Process MUST be completed for the height adjustment feature to operate properly.
• The LED Display will start to flash "000" and the table will slowly lower at the same time.
• Initialization / Reset Process: Press and hold the "Up Down" Keys for a few seconds.
• If you stop pressing/holding the Keys at any time during initialization the initialization process will fail to complete.